4-Year ALL Parts & 1-Year Labor Warranty

• Don't be fooled by the oh-so common partial (structural or select parts) warranties floating around.
• Buy with confidence, knowing we won't make you chase our vendors to make good on their warrantied parts.
• Get it in writing, no fine print and you won't hear the old "Trust Us" trick.
• World's Best Warranty because we're "HOOKED ON QUALITY"!
• Warranty Statement

SwapLoader's Family of Hook-lift Hoists

• 14 Hoist Models
• Capacities ranging from 10,500 lb. up to 65,000 lb., depending on hoist model.
• Accommodate body lengths of 10' to 24', depending on hoist model.
• Adjustable Jib height option, currently offered on five models.
• Move up or down in capacity by mixing and matching different hoist models into your fleet, as your needs change & grow. Consult your local SwapLoader Distributor and/or your SwapLoader Territory Manager for details.
• All Models Spec Sheet

Sliding Jib Design

• True horizontal movement across the working platform, without lifting off.
• Remain within the safety of the Rear Body Locks throughout a majority of Jib travel.
• Able to transfer weight rearward in an emergency overload situation, while body remains inside the safety of the Rear Body Locks.

Slide Through Rear Body Locks

• Effortless Engagement
• Up to 18" of engagement on all hoists, select hoists much greater distances (see SwapLoader sub-frame drawings under Models section for details).
• Safely secures loads during transport, dump and weight transfer situations.
• Overturn Protection Built-in

Dual Lift/Dump Cylinders

• Best load handling stability in the industry, especially while working in uneven ground situations.
• Extended life expectancy, by spreading workload and stress evenly across tandem lift/dump cylinders. All other hoist components also enjoy the same benefit and longevity.

Dual Rear Pivot Section

• Provides hoist with true dump capabilities.
• Combine with lift cylinders to offer incredibly high dump angles, up to 58°.
• Achieve max dump angle with a wider range of body lengths.
• Provides increased (pry bar) leverage when lifting stubborn or stuck containers off the ground.

Low Pressure Hydraulics

• Designed for easy sharing with other hydraulically powered equipment (spreaders, tarps, water tanks, etc..).
• Allows for use with gear pump. Gear pumps are more tolerant to system contaminants, extremely reliable in ALL weather conditions and ideal for use with low-pressure hydraulic systems.
• We utilize stackable Parker valve sections. They're easy to add onto, inexpensive to replace (in comparison) and parts are readily available, even on the local level.
• Max operating pressures of 2,800 PSI to 3,500 PSI, depending on hoist model.

Integral Dual Counterbalance Valves

• A vital safety feature that automatically locks cylinders in place, should the operator experience a sudden or unexpected loss in pressure.
• Built directly into the lift/dump cylinders, eliminating the chance of it being knocked off by a falling object.
• Guarantees even extension and retraction between lift/dump cylinders, should the load shift to one side, while dumping.
• Protects your investments; chassis, hoist, container & cargo. Most importantly, it protects your employees.
• Flow controlling valves that require a minimum of 1,000 PSI to move the lift cylinders in either direction (power up & power down).

Jib Lockout Valve

• Inhibits jib movement anytime the hoist engages the dual rear pivot by shutting off the circuit to the jib cylinder.
• Primarily designed to reduce the chances of the hoist being damaged should the driver pull the wrong lever while dumping.

Nylatron Slide Pads

• Guards against material loss in both the hoist's mainframe and container long rails (sub-frame).
• Offers silent travel across the working platform.
• Wipes debris from the bottom of the long rails (dirt, rock, snow, ice, etc..).
• Designed as a wear (replaceable) item, with a life expectancy of 3 to 5 years. Life span depends on a number of factors; loads handled per day, average load capacities and the working condition of the container long rails.

Grease Zerks & Bronze Bushings

• Allows for the expulsion of contaminants that may enter the pivot joints over time.
• Bronze Bushings will last for many, many years if greased regularly (see Parts & Operations Manuals under Models section for details).

Rigorous 4 Year Test Program

• Equivalent to four years of field performance (under severe conditions) with a flawless record.

Consistent Design

• All SwapLoader Hook-lift Hoists enjoy the same great features and benefits. SwapLoader is the only hook-lift manufacturer who can make this claim across the board.
• From the SL-105 through the SL-650, the only differences are more steel and larger cylinders to accommodate the promised (true) capacity ratings.

Made In USA

• Manufactured in Des Moines, IA.
• We incorporate a Parker gear pump & stackable valves in our basic package.
• We use standard hoses, pipe, JIC & O-ring fittings.
• No metric parts or adapters required to mask the use of metric parts.