SL-222 Specifications
model description
dump capacity (with container)
22,000 lb.
dump angle 53°
lift capacity (with container) 22,000 lb.
shipping weight 4,050 lb.
general dimensions
hook to rear roller
179.81"
hook height (to bottom pin) 54" (54" - 61.75" adjustable jib option)
Hoist height 9"
rear roller (to hoist center of gravity) 95.2"
body length 2 16' - 20'
body longsill (width) 3 40.5" or 41.62"
hydraulic system
Hydraulic pump type
gear
relief pressure 2,800 psi
hydraulic reservoir 25 gal
flow 17.4 gpm @ 1,000 rpm
lift cylinder
quantity
2
bore 6" diameter
stroke 54"
type double acting with dual built-in counterbalance valves
jib cylinder 1
quantity
1
bore 3.5" diameter
stroke 34"
type double acting with single built-in counterbalance valve
recommended truck specs
GVWR (min)
25,000 - 35,000 lb.
cab to axle dimension 142" - 160"
cab to trunion demension 4 130" - 142"
truck frame RBM (each channel) 900,000 in lb
clear frame rail 5 202"
frame height up to 43"
recommended PTO specs
type
Direct mount SAE B, 4 bolt
rotation clockwise - (r.h.)
torque required 200 ft-lbf
RPM ration 80 - 100%
notes

1 Safety Valve to prevent jib operation in dump mode standard.

2 Hoists with longer bodies may not conform with I.C.C. bumper regulations or may not achieve maximum dump angle depending on truck chassis height. Contact your SwapLoader distributor for more information.

3 Maximum outside to outside measurement.

4 Optimum CA/CT dimension will be influenced by type of loads carried and turning radius requirements.

5 Clear Frame Dim given is the overall length of hoist plus 5" for cab clearance and rear light bar mounting. Additional length is necessary for other accessories such as cab guard, tarper,etc.

[ TOP ]   [ PRINT VERSION ]